Contact to us

Multi Purpose
Anti-Skid Coating Systems

Crosscote

A specially formulated, two component polymer based multi-purpose coating system designed for application to a wide variety of common building substrates such as concrete, brickwork, asphalt and metal etc.

Product is applied by professional applicators only and available by order in White or Grey. Other pigments on order will be yellow, green and red. Please contact us for further information.

COLORS

 WHITE
GREY
RED
YELLOW
GREEN
BLACK

 

Resurfacing of Pavements, Ramps, walkways, metal steps, metal ramps, wheelchair ramps, replace tapes, loading bays, pool areas, tarmac etc..

WHERE TO USE?

Crosscote has excellent adhesive characteristics and can be applied to many types of exposed structures where resistance to adverse environmental conditions and ultra violet light is required.

Crosscote is capable of accepting normal structural movement without cracking or loosening.  Although providing good waterproofing qualities the product is micro-porous and therefore allows a cement type base to breathe, releasing entrapped water vapour therefore not creating any blisters like any floor paints.

Crosscote is available in a variety of formats allowing the correct choice of powder compound to suit individual application requirements such as Silos, viaducts, pylons, bridge structures, walkways, stadium terracing and concourses, vehicle parking decks and ramps.

This permanent solution can be applied to a variety of building materials, such as cement, bricks, metal, glass, tiles etc. Crosscote can be used on pavement curbs and corners, steep areas, wheelchair ramps and much more. We can safely say that where ever the product has been used to date, we have never received a complaint or report of any slipping accident.

In addition Cross Cote can be mixed with a variety of natural colour pigment colours (UV stable) which can be applied both on floors or walls. The product comes in a 2 part formula, that of powder and liquid which needs to be combined together to create a cream paste that can be applied with a roller on the high risk areas.

SOME OUR WORKS

 

TECHNICAL INFORMATION

SAFETY & HYGIENE

Crosscote Liquid is a water based latex emulsion and is not considered harmful to the environment.Crosscote Powder contains cement and fine dust particles. Always wear protective clothing and equipmentIn all cases spillages or skin contamination should be cleared as soon as possible by dry wiping the affected area and then thoroughly washing with soap and water.Further safety information may be obtained from Material Safety Data Sheet Ref: MSDS – 01C.APPLICATION CONDITIONS:Crosscote should not be applied in wet conditions or where such conditions are likely to occur before the coating has dried. Dry or porous substrates may be damped or primed prior to application but horizontal surfaces must be free of standing water. Crosscote should not be applied where the air or background temperature is likely to fall below 7°C.Procedure: All surfaces to receive Crosscote should be free from laitance and contamination, clean and structurally sound.Crosscote may be applied by brush, roller, trowel, squeegee or airless spray. Each succeeding coat may be applied immediately the previous coat has dried. Crosscote can be finished with a variety of textures and patterns to suit individual site requirements.

What do you think?

Your email address will not be published. Required fields are marked *

© 2020 Flooring Solutions with Safety in Mind! | Theme: Noa by j.r.s.